Product detail
Tranmission Oil
| TITAN Supergear HYP 80W-90 | |||
Demension: 20x1L 20L | Specification: GL-5 | Download thông tin sản phẩm: | TITAN SUPERGEAR HYP SAE 80W-90 is a high performance multigrade gear oil for use in transmission shafts and differentials requiring GL-5 performance. Careful selection of base oils and additive technology ensure excellent wear resistance, maintaining good viscosity under temperature. |
| TITAN Supergear HYP 85W-140 | |||
Demension: 20L | Specification: GL-5 | Download PI: | TITAN GEAR HYP 85W-140 is a mineral gear oil for shaft and lower gear transmissions where API GL-5- performance is required. The formula has proven its effectiveness with many OEMs. |
| TITAN Sintopoid FE 75W-85 | |||
Demension: 12x1L | Specification: MB-Approval 239.72 | Download PI: | TITAN SINTOPOID FE SAE 75W-85 is being manufactured using state-of-the-art, OEM-proven additive technology with a wide range of application configurations embedded in a virtually non-cutting base oil matrix. Especially The friction modifier reduces the power loss in gears and bearings due to friction, thereby increasing the efficiency of the gearbox and in parallel ensures the performance of the limited slip differential. The operating temperature of the oil tank is being significantly reduced during continuous operation. TITAN SINTOPOID FE SAE 75W-85 was developed in collaboration with a leading automaker and has been thoroughly tested. |
| TITAN ATF 4400 | |||
Demension: 20x1L | Specification: DEXRON III | Download PI: | The TITAN ATF 4400 has been specially developed to suit the special needs of modern Japanese step-by-step automatic transmissions with hydraulic shifters used in many passenger cars and light vehicles. TITAN ATF 4400 combines excellent anti-vibration properties with a high level of friction that remains constant throughout life. For this profile, selected high quality base stocks have been combined with developed additive technology. |
| TITAN ATF 6400 | |||
Demension: 20x1L | Specification: DEXRON IV | Download PI: | TITAN ATF 6400 is specifically designed to reduce performance and increase fuel efficiency for modern automatic transmissions of Japanese and US manufacturers, where reduced viscosity is required and meets the stringent specifications of DEXRON-VI and MERCON LV. TITAN ATF 6400 offers outstanding anti-vibration performance, consistent and powerful friction control properties, it is also supported by field testing of nearly 1,000,000 km. TITAN ATF 6400 is developed using selected base oils, combined with special additive technology. |
| TITAN ATF 7134 FE | |||
Demension: 20x1L | Specification: MB-Approval 236.15 | Download PI: | TITAN ATF 7134 FE is a product based on selected base oils and modern additive technology for factory use in automatic passenger car transmissions 7-G Tronic Plus (NAG II+) manufactured by Daimler AG. As the lowest viscosity gear oil of all lubricants, this product provides impressive fuel economy and low temperature operation. Extremely high frictional stability allows for enhanced oil drain intervals. TITAN ATF 7134 FE is only compatible with other officially approved MB 236.15 ATFs and is not compatible with previous MB-ATF specifications. |
| TITAN ATF 9134 FE | |||
Quy cách: 20x1L | Specification: MB-Approval 236.17 | Download PI: | TITAN ATF 9134 FE is a product based on selected base oils and modern additive technology for use in the Mercedes-Benz 9-G Tronic stepper automatic transmission (725.0/1). The extremely low viscosity of TITAN ATF 9134 FE offers great fuel economy potential and very good low temperature properties. The product also features low oil consumption and optimized stable coefficient of friction. |